FDD-LTE 800MHz LNA PA Module for Repeater Systems
Compact 2W FDD-LTE 800MHz PA module with integrated LNA, 40dB TX gain, 20dB RX gain, and 12V DC operation for RF amplification and repeater equipment integration.
Send Inquiry View SpecificationsPRODUCT OVERVIEW
800MHz FDD-LTE 2W PA Module
RX: 832–862MHz Frequency Range
KEY ADVANTAGES
Designed for Reliable RF PA Module
FDD-LTE 800MHz
Dedicated 800MHz FDD-LTE frequency coverage
Supports 791–821MHz TX and 832–862MHz RX frequency ranges with 30MHz bandwidth for each path.
2W RF Output
Stable 33±1dBm output power
The PA section provides 33±1dBm output power, equivalent to approximately 2W RF output at 25°C.
40dB TX Gain
High-gain power amplification
The TX path provides 40±1dB gain to support RF signal amplification within the specified operating range.
Integrated LNA
20dB RX gain with low noise
The integrated LNA provides 20±1dB gain with a noise figure of ≤1.8dB for the specified RX path.
Compact Integration
80 × 49.5 × 15mm compact module
The compact mechanical size makes the module suitable for integration into space-constrained RF equipment and communication systems.
12V DC Operation
Low-voltage DC power supply
The module operates from DC +12V with a specified maximum current of ≤1.8A, supporting integration into low-voltage RF equipment.
TECHNICAL SPECIFICATIONS
FDD-LTE 800MHz PA Module Specifications
RF Performance
| Parameter | TX / PA | RX / LNA |
|---|---|---|
| Frequency Range | 791–821MHz | 832–862MHz |
| Bandwidth | 30MHz | 30MHz |
| Gain | 40±1dB | 20±1dB |
| Output Power | 33±1dBm | -10±1dBm |
| In-Band Ripple | ≤2.0dB | ≤2.0dB |
| VSWR | ≤1.5 | ≤1.5 |
| ACPR | ≤-36dBc | / |
| EVM | ≤5% | / |
| Noise Figure | / | ≤1.8dB |
General Specifications
| Parameter | Specification |
|---|---|
| Power Supply | DC +12V |
| Current Consumption | ≤1.8A |
| Operating Temperature | -25°C to +55°C |
| Storage Temperature | -25°C to +65°C |
| Humidity | 5%–95% |
| RF Connector | MCX Female |
| Power Connector | PHD2.0MM-2×3PIN |
| Dimensions | 80 × 49.5 × 15mm |
Out-of-Band Spurious
| Frequency Range | Spurious Level |
|---|---|
| 9kHz–1GHz | ≤ -36dBm/30kHz |
| 1GHz–12.75GHz | ≤ -30dBm/30kHz |
MECHANICAL DESIGN
Dimension Drawing
Overall Dimensions: 80 × 49.5 × 15mm
APPLICATIONS
Flexible RF System Integration
Because the supplied datasheet specifies the RF characteristics but does not explicitly list end-use applications, the following should be treated as recommended application positioning rather than datasheet-derived claims.
LTE Repeater Systems
For RF amplification modules integrated into FDD-LTE repeater and coverage enhancement equipment.
RF Signal Amplification Equipment
Suitable for equipment requiring dedicated 800MHz FDD-LTE TX/RX amplification.
Wireless Communication Equipment
Designed for integration into compact wireless communication and RF front-end systems.
Indoor / Outdoor Coverage Equipment
Can be considered for RF equipment requiring compact LTE amplification modules.
Customized RF Systems
Suitable for OEM/ODM RF equipment projects requiring a compact PA + LNA module.
RF Test & Development Equipment
Can be integrated into RF development and testing platforms where the specified 800MHz FDD-LTE amplification characteristics are required.
MANUFACTURER & SUPPLIER
FDD-LTE PA Module Manufacturer & RF Amplification Supplier
As an RF power amplifier module manufacturer and supplier, we provide compact PA and LNA modules for wireless communication equipment integration. The BT-PL806M-33-40S5 combines an FDD-LTE 800MHz PA path and LNA path in a compact module, supporting 2W-class RF output, 40dB TX gain, 20dB RX gain, and 12V DC operation.
RF Manufacturing
Professional RF product manufacturing capability.
Engineering Support
Technical support for product selection and integration.
OEM / ODM
Support customized RF Power Amplifier Module requirements.
Technical Documentation
Product specifications and engineering documentation.
FAQ
Frequently Asked Questions
01. What frequency does the BT-PL806M-33-40S5 support?
The module supports 791–821MHz TX and 832–862MHz RX, with 30MHz bandwidth for both paths.
02. What is the output power of this FDD-LTE PA module?
The TX PA provides 33±1dBm output power at 25°C, corresponding to approximately 2W RF output.
03. What is the gain of the PA and LNA?
The PA provides 40±1dB TX gain, while the LNA provides 20±1dB RX gain.
04. What power supply does the module require?
The module operates with a DC +12V power supply and has a specified current consumption of ≤1.8A.
05. What are the dimensions of the module?
The module measures 80 × 49.5 × 15mm, making it suitable for compact RF equipment integration.
06. What connectors are used on the module?
The module uses MCX Female RF connectors and a PHD2.0MM-2×3PIN power supply connector.
Looking for a FDD-LTE 800MHz 2W LNA PA Module?
Contact our RF engineering team for product specifications,technical information, and OEM / ODM requirements.
Contact Our RF Engineering Team